A Barrett company - serving Las Vegas, NV

Vanities, Tile & Fixtures in Las Vegas, NV

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Vanities, Tile & Fixtures in Las Vegas, NV

New vanity, tile, and fixtures work in Las Vegas typically runs $1,800 to $9,500 depending on how much you’re replacing and whether plumbing has to move. Most of our single-vanity tile-and-fixture jobs land in the $3,000 to $6,000 range and take three to seven working days, since we pull the permit before the first tile gets set. If your bathroom is still stuck in a mid-90s builder palette, or a leak behind the vanity has quietly rotted the subfloor, we do that work under our full Bathroom Remodeling in Las Vegas scope and back it with the same 90-Day Done Right Promise on every job. Call (866) 814-4155 and a live person answers, day or night.

A vanity and tile job is not a remodel of the whole room. It’s the surfaces and the fixtures: the cabinet, the countertop, the faucet, the shower and floor tile, the drain, the light bar, the mirror. It’s the visible layer of the bathroom, where your eye lands first, and it’s also the part of the bathroom that sees the most moisture, the hardest water in the valley, and the most use. Getting it right isn’t decorative. It’s what keeps the bathroom from becoming a repair.

Why Barrett & Sons handles this work

Tom Barrett and his sons are on-site most days. Not a franchise dispatching strangers, not a call center handing your address to whoever answers. We’ve been an owner-operated local builder since 1998, and vanities, tile, and fixtures are the trade where shortcuts show up fastest: a 1/16-inch gap in a shower niche, a faucet set on a vanity that wasn’t anchored to the studs, a marble threshold that wasn’t sealed and stains in six months. We write every scope and every allowance in writing before work starts, because an allowance that isn’t on paper is a surprise waiting for a date. Every eligible job gets a permit and an inspection because the permit inspector works for you, not for us.

Our crew members have up to 28 years of experience, and every one of them is background-checked. The brands we install are names you can look up: KraftMaid cabinets, Cambria quartz, Wellborn, James Hardie for wet-area backer where it belongs. If a material doesn’t survive Las Vegas tap water and 105-degree afternoons with a south-facing bathroom window, we steer you away from it and tell you why.

What makes Las Vegas vanities and tile different

Water here is hard. Average hardness runs 16 to 20 grains per gallon depending on which side of the valley you’re on, and that number changes how you pick a faucet finish, how often the shower glass needs squeegeeing, and whether a polished marble floor will be a friend or a curse. In Summerlin, we regularly see white calcium spotting on polished porcelain shower walls within four months of install. In Henderson’s older pockets around Water Street, we pull vanity cabinets and find that the shutoff valve has been slowly weeping for years and the cabinet base is soft. In North Las Vegas, out toward Aliante, we’re pulling builder-grade cultured marble tops that crack at the seam because the cabinet sagged under them.

Tile in Las Vegas also moves. The desert soil heaves and settles, and a shower pan that isn’t properly sloped will pool water, spot between the shower door track and the tile floor, and grow a smell you can’t get rid of. We set tile on a sloped mortar bed with a written pre-slope and a water test, not a chunk of cement board screwed to a curb. That’s not a marketing point. It’s what keeps a $6,000 shower from turning into a $12,000 demolition-and-redo two winters later.

When You Need Vanities, Tile & Fixtures

You know it’s time when the room tells you. Common scenarios we see across the valley:

  • The vanity cabinet is soft under the sink. A slow drip from a shutoff or drain line soaks the particleboard base and the cabinet swells. In Las Vegas, dry air hides the leak for months, so by the time you notice the cabinet door won’t close, the subfloor behind it usually needs replacing too.
  • Tile grout is cracked, missing, or chalky. Ours shrinks and fails in the low-humidity heat, especially on shower walls. Once grout goes, water gets behind the tile and the waterproofing layer takes the brunt. That’s a job to stop before it becomes a tear-out.
  • Faucets, showerheads, and drains are calcified shut. Hard water in Las Vegas plugs aerators and shower cartridges within a few years. If your showerhead looks like a salt lick, the cartridge behind the handle is probably next.
  • You’re putting a house on the market. Bathrooms top the buyer shortlist. A clean vanity refresh, neutral porcelain tile, and new fixtures often returns more than the cost at resale in the $350K to $700K range.
  • Aging-in-place changes. Many of our customers are in their 60s or 70s and want a comfort-height vanity, a curbless shower with a linear drain, and grab bar blocking set in writing before the tile goes up. Doing it now is a $400 line item. Doing it after tile is a $4,000 line item.
  • Mold, mildew, or peeling caulk around the tub. Southern Nevada is dry, but shower interiors aren’t. If you’re seeing persistent mildew, the backer behind the tub surround may not be waterproofed.

If your project is bigger than tile and a vanity, the broader scope lives on our Bathroom Remodeling page. Smaller, targeted work is our bread and butter here.

Our Vanities, Tile & Fixtures Process

Every job runs the same playbook. No guessing, no verbal revisions, no surprises at the final invoice.

  1. On-site walk-through and written scope. Tom or one of his sons walks the bathroom with you. We measure, photograph, note the shutoff valves and the drain location, and check the subfloor and backer. You get a written scope with line-item allowances for the vanity, tile, and fixtures, plus a free second opinion on any estimate you’ve already received. There’s no trip charge inside the county.
  2. Permit pulled and materials locked. We pull the permit before demolition. Every eligible job gets inspected, period. Materials get ordered with lead times spelled out in the scope, and if a KraftMaid cabinet or a Cambria quartz top shifts availability, that conversation happens in writing, not at the final bill.
  3. Demo, plumbing, and backer. Tile comes out. The vanity comes out. If the shutoff valves are dated or weeping, they get replaced. The backer and waterproofing go in with proper slope and a written water test on shower pans. This is the step nobody sees and every future failure starts here.
  4. Tile setting and grout. Layout gets dry-fit and photographed for your sign-off before any mortar is mixed. We set floor and wall tile with the right thinset for the substrate, and we seal per manufacturer spec. Porcelain in the wet zones, natural stone where it makes sense, and we tell you straight if a polished stone is a bad pick for a shower floor.
  5. Vanity, countertop, and fixtures. The vanity gets anchored to the studs, not just the drywall. The top is set and sealed. Faucets, drains, showerheads, mirrors, and lighting go in and get tested for leaks and flow before we hand you the room. Every fixture we install carries the manufacturer warranty, and our written 90-Day Done Right Promise covers the labor.
  6. Final walk-through and written close-out. We walk the job with you, fix anything on your punch list, and leave a written record of what was installed, by whom, and under what warranty. One call brings us back if anything’s off inside 90 days.

Vanities, Tile & Fixtures Pricing in Las Vegas

Honest ranges from projects across the valley. Every job is a written estimate, and every change order is signed before the scope moves.

Line item Typical range Notes
Single-sink vanity with top (installed) $650 – $2,400 KraftMaid or Wellborn cab, quartz or porcelain top; Cambria quartz runs at the top of the range
Double-sink vanity with top (installed) $1,400 – $4,800 Size, cabinet line, and top material drive the spread
Faucet and drain replacement $180 – $420 per fixture Includes cartridge and supply line check
Shower tile (walls, standard porcelain) $1,800 – $4,500 Includes demo, backer, waterproofing, setting, and grout
Shower pan with proper slope and water test $1,200 – $3,200 Curbless and linear-drain installs run higher
Floor tile (up to 50 sq ft) $900 – $2,100 Porcelain is standard; natural stone adds sealing time
Full bundle: vanity, tile, fixtures in one bathroom $3,000 – $9,500 Most single-bath jobs land $3,000 – $6,000

What moves the number most is scope: how much tile, whether plumbing relocates, whether the subfloor needs repair, and what material you pick for the top and shower walls. A $50 porcelain floor tile looks a lot like a $15 one on day one and a lot different on day 1,800. We price both so you see the trade-off in writing, not on a phone call.

Ask us about the $40 off any repair over $200 and the permanent 10% senior and veteran discount. Both apply to this work. Estimates are free, and the second opinion on another contractor’s written estimate is free too.

Key takeaways

  • Most Las Vegas vanity, tile, and fixture jobs land $3,000 to $6,000 and take three to seven working days.
  • Permits are pulled on every eligible job, and every change order is signed before the work moves.
  • Hard water and desert soil movement drive the choices we make on materials and shower pan construction.
  • Crew members are background-checked, and our techs have up to 28 years of experience.
  • Every completed job carries the written 90-Day Done Right Promise.

FAQs – Vanities, Tile & Fixtures

How much does a new bathroom vanity cost in Las Vegas?

A single-sink vanity with top installed typically runs $650 to $2,400, and a double-sink runs $1,400 to $4,800. Cabinet line, top material, and whether plumbing has to move drive the spread; KraftMaid and Wellborn cabs sit in the middle, and Cambria quartz tops run toward the top of the range. Call (866) 814-4155 for an exact quote. Estimates are free.

Can you replace my vanity and shower tile without gutting the whole bathroom?

Yes, and most of our customers choose this route. We demo the vanity and the tile surfaces, inspect the backer and waterproofing behind them, repair what needs repairing, and rebuild in place. If we find rot or a failed shower pan behind the tile, we tell you in writing before we go further; that’s when the scope becomes a change order, not a surprise at the end.

Do you pull permits for tile and fixture work?

Yes, on every eligible job. Plumbing fixture relocations and shower valve replacements need a permit in the City of Las Vegas and in Clark County, and we pull it before demolition starts. Inspections get signed. The permit inspector works for you, not for us.

Why does shower tile fail so fast in Las Vegas?

Three reasons: hard water, dry air, and sun. Hard water leaves mineral deposits that etch grout and natural stone, dry air shrinks and cracks cement-based grout faster than in humid climates, and south- or west-facing bathrooms get direct sun that pushes interior wall temps well past 100 degrees in July. We set tile on a properly sloped waterproofed pan and pre-slope, use the right thinset for the substrate, and seal per spec. That’s what keeps it from failing in year two.

How long does a vanity and tile job take?

Most single-bathroom jobs run three to seven working days from demo to final walk-through. Larger scopes, custom cabinet lead times, or a curbless shower rebuild push it longer; we put the schedule in writing with the scope so you know what to expect before demo starts.

Do you offer senior and veteran discounts on this work?

Yes, a permanent 10% senior and veteran discount applies, alongside $40 off any repair over $200 and a free second opinion on any written estimate. No trip charge inside the county.

If your vanity is sagging, your tile is failing, or your faucets are done, call (866) 814-4155. A live person answers, day or night, and we can usually get someone out this week. We’re a local builder, our name is on the job, and our number is on the truck. Look up the license before you sign anything; we hope you will.

Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas.

Need Construction help in Las Vegas? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch