Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Enterprise, NV | Barrett & Sons Construction Las Vegas
We install and service Mr-Glass shower enclosures throughout Enterprise, NV, as an independent contractor. The one thing that makes our Mr-Glass work different here: the 1990s and 2000s tract homes that make up most of Enterprise were framed fast, and a lot of the bathroom walls sit slightly out of plumb. Stock panels often don’t fit clean, so we template and cut glass to your actual opening. Call (866) 814-4155 to schedule a free estimate. We’re working with independent glass professionals across Enterprise, not a manufacturer’s dealer network.
Why Enterprise Residents Choose Us for Mr-Glass Service
We know the Mr-Glass lineup well: frameless pivot doors, sliding bypass tub/shower enclosures, Neo-Angle corner units, and semi-frameless hinged doors. We know how each one ages, where the weak points show up, and which parts are worth replacing versus which glass is worth swapping out. We’re not affiliated with, authorized by, or endorsed by Mr-Glass. That independence matters. It means we quote the glass and hardware configuration that actually fits your Enterprise bathroom, instead of defaulting to whatever a dealer happens to have sitting on a warehouse shelf.
We use OEM Mr-Glass rollers, pivots, sweeps, and hinges wherever they’re available, and quality aftermarket parts when OEM is back-ordered or discontinued. That’s not a cost-cutting shortcut; it’s the honest way to keep a unit working when a specific part number has vanished. No local stock claims, no invented promises. We source what the job needs. Mr-Glass service from an independent crew means your Enterprise project starts with measurements, not a catalog.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Solve in Enterprise
- Cracked door sweeps and dried-out sealant. Mr-Glass frameless units come with factory clear sealant and sweeps that dry out and crack under 105°F+ summer heat and relentless sun. Once they fail, water tracks past the curb and starts wicking into the wall cavity. In Enterprise, this happens fast; two or three summers is all it takes on a south-facing bathroom wall.
- Worn bottom rollers on bypass doors. The cheap bottom rollers and pivot bushings on Mr-Glass bypass enclosures wear out in Las Vegas valley hard water. Panels start to bind, jump the track, or hang off-plumb. Replacing rollers and pivots usually solves it; sometimes the track itself has to go.
- Tempered glass edge chips. A nick from a tile or fixture during an Enterprise bathroom remodel can sit dormant and shatter the pane later with no warning. We look for edge damage during every walkthrough, because a chipped temper is a replacement, not a repair.
- Out-of-plumb walls pulling at hinges. Semi-frameless Mr-Glass doors installed on crooked 1990s tract-home walls pull away at the hinge side, and that gap leaks and stresses the glass. Shimmed hinges and custom-cut panels are the fix.
- Corroded frames past cleaning. Hard water and mineral deposits pit the frame over time. When cleaning won’t get it done, replacement is the honest answer, and we’ll tell you so.
Mr-Glass Service in Enterprise: What Local Conditions Mean for Your Equipment
Enterprise grew up almost entirely in the 1990s and 2000s, which means nearly every Mr-Glass enclosure we service here sits inside a two-story stucco tract home with a tile roof, a three-car garage, and a block-walled lot. Those homes were built fast, and a lot of the bathroom framing and backer walls ended up slightly out of plumb. That’s the fact that shapes our Mr-Glass work here more than anything else: frameless and semi-frameless enclosures in ZIP 89139 often need custom-cut glass and shimmed hinges rather than a stock off-the-shelf panel. A panel spec’d to a straight wall and dropped into a wall that’s half an inch out will leak at the hinge side and stress the temper every time the door swings. Add Clark County’s strict SNWA water-efficiency and heat-driven energy standards to the mix, and this really is renovation territory, not new construction. So we template first, order glass to the real opening, and seal with UV-rated silicone that survives the desert sun.
Mr-Glass Models & Products We Service in Enterprise
We handle the full Mr-Glass shower-enclosure lineup across Enterprise: frameless pivot shower doors, sliding bypass tub/shower enclosures, Neo-Angle corner shower units, and semi-frameless hinged shower doors. For each, we quote the glass and hardware that fits the actual opening, not a stock configuration. OEM Mr-Glass parts come first where they’re available. When a roller, sweep, or hinge is back-ordered or discontinued, we move to quality aftermarket equivalents that hold up in the desert heat. We don’t claim local stock; parts are sourced per job. If the glass is chipped at the edge or the frame is corroded past cleaning, we’ll tell you replacement is the honest call. Hardware and seals alone are usually repairable.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Enterprise
Most Enterprise Mr-Glass work lands in the ranges below. What moves your number: shower size, whether the wall is out of plumb and needs custom-cut glass, the hardware finish you pick, and whether the tile and curb need rework underneath. Every quote is a written line-item estimate, and the price doesn’t change once work starts unless you approve a written change order.
| Service | Typical Cost in Enterprise |
|---|---|
| Walk-In Shower Installation | $4500 – $12000 |
| Tub-to-Shower Conversion | $3500 – $10000 |
| Shower Replacement | $3000 – $8500 |
| Bathroom Remodel | $9000 – $28000 |
| Small Bathroom Remodel | $5000 – $12000 |
Call (866) 814-4155 to schedule a free estimate. We’ll walk the bathroom, take real measurements, and put it in writing.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Enterprise
Yes. Out-of-plumb walls are the rule in Enterprise’s 1990s and 2000s tract homes, not the exception. The fix is to template the opening, order glass cut to the actual measurements, and shim and seal the hinges so the door swings true. Call (866) 814-4155 for a free estimate that accounts for the real wall.
The factory clear sealant and door sweeps dry out and crack under 105°F+ heat and intense UV, which lets water track past the curb. That’s a seal failure, not a broken unit. Replacing the sweeps and re-sealing with UV-rated silicone usually stops it. Call (866) 814-4155 and we’ll take a look.
HOA architectural review is a routine step in Enterprise before exterior changes, and it’s worth a quick check with your board even for an interior glass swap. We’ll tell you what to ask. Call (866) 814-4155 and we’ll go over your project before you commit to anything.
Repair is usually worth it. Worn bottom rollers and pivot bushings are the most common failure on Mr-Glass bypass doors in Las Vegas valley hard water, and new rollers and pivots fix binding or off-track panels without replacing the glass. If the frame is corroded past cleaning or the glass is chipped at the edge, replacement is the honest call. Call (866) 814-4155 for a free estimate.
Walk-in shower installation in Enterprise typically runs $4500 – $12000. Your number depends on shower size, hardware finish, and whether custom-cut glass and a reworked curb are needed for an out-of-plumb wall. Call (866) 814-4155 for an exact quote; estimates are free.
Service Areas Near Enterprise
We also work on Mr-Glass enclosures in Las Vegas, Summerlin, Spring Valley, Winchester, and Paradise, plus the rest of our Enterprise service area. If you’re near the southern 89139 edge, we’re close by.
Book Your Mr-Glass Service in Enterprise Today
Whether you’re converting a tub to a walk-in shower or replacing chipped Mr-Glass glass in a 1990s Enterprise bathroom, we’ll template the opening, quote it in writing, and install it right. Our technicians have up to 28 years of experience, and the work is backed by our 90-Day Done Right Promise. Call (866) 814-4155 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Las Vegas.